EA500H4 curved rental LED display and flat rental LED screen splicing
Left: curved lock LED screen
Right: flat lock LED screen
First, we need to replace the green quick lock of the flat rental LED screen with our black quick lock. The specific steps are as follows:
1. Confirm the groove position: Check the groove position on the black quick lock. When installing the black quick lock, pay special attention to the groove must be facing the screw to ensure that the quick lock is firmly fixed.
2. Install the black quick lock: After placing the black quick lock in place, tighten the screw. When tightening the screw, make sure the groove is aligned with the screw so that the quick lock can be firmly fixed on the flat rental LED screen.
3. Repeat the operation: Follow the above steps and repeat the installation of other black quick locks until all quick locks are installed.
Next, we need to adjust the curved lock to the 15 mark and fix it:
1. Adjust the curved lock: Rotate the curved lock to the 15 mark to ensure that its angle is correct.
2. Fix the curved lock: Once the curved lock is adjusted to the correct angle, use screws to fix the curved lock to ensure that it does not move during operation.
After completing the above steps, we pull the flat-panel rental LED screen over for docking:
1. Docking the flat-panel LED screen: Move the flat-panel rental LED screen next to the curved rental LED screen and align the connection points of the two.
2. Lock the docking point: Once the docking points are aligned, use the quick lock to lock the two screens to ensure a secure connection.
When you need to adjust the screen angle, do the following:
1. Release the curved lock: When you need to adjust the curvature parameters of the screen, first release the curved lock. In this way, the curved lock can move freely.
2. Adjust the curvature parameters: Adjust the curvature of the screen as needed to ensure that the curvature meets the actual usage requirements.
The above are the operation demonstration steps for splicing the EA500H4 curved rental LED screen with the flat rental LED screen. Through these steps, the seamless splicing of the two types of LED screens can be achieved, providing better visual effects and display effects for various occasions.
