How does Novastar controller VX1000, Novastar LED VX600 processor, Novastar VX400 controller and Novastar VX16S processor LED display video controller connect with the control computer? Take the VX1000 video controller as an example to introduce how to connect the Nova LED VX series controller with the control computer. And usually we need to prepare four cables: the controller power cable, the network cable connected to the screen, the HDMI and USB cables connected to the computer.
First, connect the controller power cable. Plug the power cord of the controller into the power port of VX1000, and plug the other end into the power socket.
Second, connect the network cable. Use a network cable to connect the LED screen to the control computer. First, connect one end of the network cable to the interface of the LED display cabinet, and then connect the other end of the network cable to the interface of the VX1000.
Next, connect the USB cable. Plug one USB port into the VX1000’s USB port, and then plug the other USB port into the control computer’s USB port. So this allows the controlling computer to communicate with the VX1000.
Finally, connect the HDMI cable. Plug one HDMI port into the HDMI output port of the VX1000, and then plug the other HDMI port into the HDMI input port of the control computer. Through the HDMI connection, the controlling computer can transmit the content to the LED display.
After completing the above connections, the LED display will display the same content as the control computer. And you can set and adjust on the control computer, and transmit these instructions to the LED display through the VX1000 video controller, so as to realize the playback and display of content.
Except for the VX1000 video controller, other Novastar VX series controllers are connected in a similar way. You only need to select the correct interface and cable for connection according to different models of controllers.
To sum up, to connect the Novastar VX series video controller and the control computer, you need to prepare the controller power cable, the network cable connected to the screen, and the HDMI and USB cables connected to the computer. After these cables are correctly connected to the corresponding interfaces, the LED display will be able to communicate with the control computer and display content normally.
If you need to know the connection method of other Novastar video processors or have other questions, you can leave us a message, and we EagerLED will try our best to answer you.
