When installing the EA320F outdoor front service LED display, we need to follow the following steps to ensure the correctness and smoothness of installation.
1. Fix the box with connecting iron pieces: First, align the LED boxes in the first row to ensure that the LED boxes are correctly aligned and placed parallel. During the installation process, use connecting iron pieces to install from the front and connect adjacent LED boxes together. The solid connection between the LED boxes can be ensured by fastening the iron sheets.
2. Connect the power cord in the box: Pass the prepared power cord through the hole reserved between the two cabinets. And use a screwdriver to install it to the terminal blocks at both ends. Make sure the power cord is firmly connected to ensure normal power supply.
3. Connect the signal cables in the boxes: Use the signal cables to pass through the signal cable holes between the boxes and connect to the receiving card of each box. This method ensures the transmission of the signal and delivers it to each LED box.
4. Perform a power-on test: Check whether there is normal power supply and signal transmission by observing the status of the LED power indicator and LED receiving card indicator. Make sure the display is working properly and without any glitches.
5. Install the LED module: Before installing the LED module, be sure to disconnect the power supply to ensure the safety of the operation. Then, install the LED modules according to the specified method and sequence. And Ensure that each module is firmly connected and aligned to ensure the overall smoothness and quality of the picture.
6. Perform a lighting test: After connecting the signal cable to the playback box, the last module can be installed. Connect the power cord and perform a lighting test. This stage is the last step to verify the installation. Then you should ensure that the entire display can light up normally and the picture appears normally.
Through the installation process, be sure to carefully follow the installation guidelines and instructions provided by the supplier. Ensure secure connection of materials, accurate connection of power and signal wires, and adequate testing and debugging. Only by ensuring correct installation can the reliability and stability of the display be ensured. So the front service LED display provides users with a good experience.
