If you don’t know how to install indoor P1.25 small spacing HD LED video wall, here are some detailed steps for your reference.
First, you need to prepare the cabinet and cabinet accessories for installation.
Step 1: Install the support bracket of LED video wall
Use the support frame to find the horizontal line and mark the location where the holes need to be drilled.
Use an electric drill to drill holes in the wall, place the support bracket at the marked location, put the expansion bolts into the opened holes, and hammer the nails into the holes with a hammer.
Prepare the connecting iron piece to connect the two support frames, fix it on the inner end of the support frame with screws, and tighten it with an electric drill.
Step 2: Install the cabinet on the support frame
Fix 4 M10 screws into the 4 screw holes on the back of the cabinet, and place the cabinet on the support frame. Align the M10 screws with the hoist holes of the support frame. Make sure the cabinet is securely fastened to the support frame.
Connect and fix the adjacent cabinets of LED video wall, then install the second row of support brackets and align the hoist holes of the support brackets with the M10 screws.
Step 3: Install the cabinet power cable and signal cable
Connect the power cord of the cabinet. Pass the wire through the hole reserved between the two cabinets. Connect both ends of the power cord, and finally select one end of the power cord.
Step 4: Install LED display
Adjust the flatness of the cabinet to achieve a complete flat surface.
Step 5: Power on test
Power on to test whether the LED power indicator and LED receiving card indicator are operating normally.
Step 6: Install the LED module
Follow the direction indicated by the arrow in the module to start installing the LED module.
Step 7: Aging Test
After the module is installed, turn on the signal source playback box and power supply, and light up
