- LED cabinet and bracket installation.
First, we place the LED cabinet on the level ground and connect them through the quick locks on both sides. During installation, make sure someone supports the LED cabinet to prevent it from falling.
Then we install the EA500C6 LED cabinet on the bracket, align the two holes under the connecting iron piece with the LED cabinet holes, complete the fixation, and repeat the process just now.
- Connect the power cable and signal cable
Insert the signal cable into the interface at the bottom of the LED cabinet, and insert the other end into the interface at the bottom of another LED cabinet. After plugging in the power cord, align the yellow plug with the yellow interface, and the black plug with the black interface. Connect them in sequence.
Next, we connect the signal lines between the LED display processor and the cabinet.
- Configure LED screen
Insert the USB flash drive, open “NovaLCT”, click to send the parameters to the receiving card, and after success is displayed, click Save to complete the configuration.
