If you don’t absolutely know how to splice LED poster screen, you will receive detailed steps after reading this article.
First, we use a screwdriver tool to remove the wrapping on the top of the LED poster screen.
Then we removed the side edging of the poster screen. When removing the last screw be aware that the edge will fall down.
Because the poster screen needs to be attached, the side of the other piece needs to be removed. Use a screwdriver to unscrew the screws.
We need to dismantle the top and sides of the three LED poster screens in sequence.
When our demolition is complete. Two LED poster screens need to be spliced together using connecting iron sheets. The two poster screens need to be kept level before splicing.
When splicing the third LED poster screen, it is also necessary to keep it level with the first two screens, and then use connecting iron sheets to splice them together.
Before using the HDMI cable provided by us.
First we should face the back of the LED poster screen, and the connection sequence should be from right to left. And the connected WIFI is the first screen on the right, and the WIFI name will be posted on the outside of the box.
Use an HDMI cable to connect to the HDMI OUT on the right. Connect the other end to the HDMI IN of the middle screen.
Then use another HDMI cable to connect to the HDMI OUT of the middle screen. Connect the other end to the HDMI IN of the left screen.
